[Fjefman]

I'm looking to a custom forks spacer made for one of my motorcycle projects. The specs of the space can be seen in this picture - https://www.dropbox.com/s/f3qxp9gurj...55.02.jpg?dl=0

A picture of the finished product is here - https://www.dropbox.com/s/22vzljsff7...09.52.jpg?dl=0

I would like to get 3 of these made

The material would be Stainless Steel

I have both a nut and an axle with the exact threads that I can send if those are needed to match them in these new parts.

Once done I need shipping to Roswell, GA.

I would like to get these as soon as possible. The rest of my build is dependent on these parts.

Not sure what else is needed to appropriately quote this. Let me know.

Jeff
[email protected]

[w.m.s.]

Can you provide pictures so we don’t have to download from a Dropbox link just to see if it is feasible to make?

[Bob La Londe]

Pretty simple part. Anybody with a lathe and a little skill can make it. Maybe even that crotchety old guy down the street who is always tinkering in his garage. P.M. me if you haven't already got it done.