[Bradnicent]

Hi guys I bought a mach3 license from ebay and trying to do a run from here on my Cnc plasma gantry .... I’m not sure how this works but when I hit the the run from here button I get a status saying “plasma. 1.5 mm kerf” which is my tool in plasma is sheetcam

Can anyone please explain to me how exactly this works

Thanks


Sent from my iPhone using Tapatalk

[ger21]

The message you are seeing is likely just a comment inthe g-code.

To use Run From Here, you just scroll through the g-code to the line before the one you want to start, and click Run From Here. You should see a pop up window for a prep move and other option.

If you paid less than $150 for your license, it's probably a pirated license, and may not always work correctly with newer versions of Mach3.

[Bradnicent]

Yes i paid way less then 150 ..... but it claims to work with version I’m running


Sent from my iPhone using Tapatalk