584,833 active members*
5,515 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Post Processors > Help: Error on the last pass
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2018
    Posts
    1

    Help: Error on the last pass

    I have an error on the very last pass of my cut on our cnc router.

    I am fairly new to using the machine and have been fine so far with the smaller stuff that I have made. This project is much more complex and detailed.

    My final finishing pass is giving me an error that says "COMPILER ERROR: System Exception: Faces Compilation phase: LxHxS = 96.00x48.00x1.13 [inch]"

    Any help would be greatly appreciated!
    Attached Thumbnails Attached Thumbnails imagejpeg_0 (1).jpg  

  2. #2
    Join Date
    Apr 2013
    Posts
    1788

    Re: Help: Error on the last pass

    Is this error message from Vectric software or from the controller on your router? Have you tried the Vectric support site Vectric Forum • Index page

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •