While power on alarm 8 comes with all 4 green led on . While screen is showing White display. After disconnection of HSSB PCB . Only system gets ready but display showing same white.
Do anyone fanced this. Please help.
Sent from my SM-J710F using Tapatalk
Results 1 to 3 of 3
-
12-27-2018, 08:57 PM #1
Junior Member
- Join Date
- Nov 2018
- Posts
- 28
FANUC 180i mb alarm 8 on main board
-
12-26-2020, 03:49 AM #2
Member
- Join Date
- Sep 2020
- Posts
- 4
Re: FANUC 180i mb alarm 8 on main board
I have the same problem . What did you do to fix
Originally Posted by Nil27
While power on alarm 8 comes with all 4 green led on . While screen is showing White display. After disconnection of HSSB PCB . Only system gets ready but display showing same white.
Do anyone fanced this. Please help.
Sent from my SM-J710F using Tapatalk
I need your help !!! Please
rgdindustrial arroba gmail dot com
-
01-06-2024, 05:27 AM #3
Junior Member
- Join Date
- Jan 2016
- Posts
- 17
it could be sram card issue. if you already have sram backuo in hand, remounting sram card to make better seat contact to the socket.
boot in IPL mode, check the sram.
if the sram is in ok condition (backup/restore without error) try to boot normaly if it still doesnt boot
so you have cpu card or main board problem
Reply With QuoteSimilar Threads
-
Fanuc 10TE-F with main board error F
By superstardeejay in forum FanucReplies: 6Last Post: 10-24-2017, 09:48 AM -
Fanuc 180i/ New Ball screw
By Gotemcity in forum FanucReplies: 0Last Post: 07-24-2015, 05:18 AM -
pro engineer post processor fanuc 18i mb5 and fanuc 180i Ma
By nickargas in forum FanucReplies: 10Last Post: 03-02-2013, 05:00 AM -
post processor fanuc 18i mb5 and fanuc 180i Ma
By nickargas in forum PTC Pro/ManufactureReplies: 1Last Post: 02-27-2013, 11:54 AM -
Fanuc 18t-b main board plug in cards
By amtekinc in forum FanucReplies: 9Last Post: 03-23-2011, 07:15 AM
Tags for this Thread
Posting Permissions
