584,808 active members*
5,285 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2007
    Posts
    24
    Hello guys
    We are looking for a pre-setting device for milling tools.
    Has anybody got experience with devices from the firm Precitool?

    Many thanks for your answers

    Best wishes

  2. #2
    We have a Preciset 400 with the ImageController2 for 1 year now.
    Its not bad – however you need to know where the device has its limits.
    Its enough for us but if you want to measure µ, you better off looking at devices from Zoller.

    I got told that exact sentence on a fair by a Precitoolmitarbeiter employee.
    Accuracy with Preci is at 1-2 hundredth- that gives reason for the release.
    But it was immediately deliverable and well priced.

    I want to add that the devices actually come from Zoller- however they don’t resolve so well and that the software doesn’t come close to the one from Zoller.
    There are other well knows manufacturer with reasonable prices- that’s for sure.

    Regards

  3. #3
    Hello

    Look at Kelch Presetter. The produce in Germany and have a very good Presetters.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •