Hi
I'm trying to get the homing function working on my WJ200. Here are my settings:
P068 = (00) low speed
P069 = (00)* Forward direction
P070 = ( .2 ) HZ*LS frequency
*
C6 input (*69*)*ORL** Index Signal
C5 input ( 70*) ORC* Start homing trigger
*
C021 output 11 *(23) POK* positoning complete
When I activate pin 5 it is my assumption the spindle should turn clockwise at .2 HZ until it sees a signal on C6.
When I activate pin 5 nothing happens.
Has anyone ever managed to get homing working?
Thanks
Derek
*