hello
I Need to set the
dip switch settings
for the 3 KL-8056 Drivers
https://www.automationtechnologiesin...rivers/kl5056/
2
(KL23H2100-50-4B)
X,Y motors
https://www.automationtechnologiesin...lat-570-oz-in/
and
1
KL34H280-55-4A
For Z
https://www.automationtechnologiesin...-640-oz-in-55/
pin 4 off for x,y on full current for Z
direct drive PM-25 Mill
2nd build