584,817 active members*
4,701 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > milltronics centurion 7 - Startup error 188
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2021
    Posts
    1

    milltronics centurion 7 - Startup error 188

    Hello

    milltronic centurion 7

    "runtime error 188 at 0010: 00e3"
    picture attached

    the car stops at any moment and I see this screen.
    restart helps, but after a while it repeats.

    Does anyone know this error?

  2. #2
    Join Date
    Oct 2017
    Posts
    39

    Re: milltronics centurion 7 - Startup error 188

    You want that topmost error code, error 956.

    In the Cent7 manual:

    188 Also appears as error 956.
    Interface card communication failure

    Centurion 7 and 7000 Series only
    CNC Version 238 and newer
    NCB Firmware 3.19 and newer
    No information was received from the interface card for 10 heartbeats
    of the control, about .01 seconds.
    CAUSES:
    1. Fiber-optic cable loose.
    2. Bad interface card.
    3. Bad NCB card, since it must receive the information from the interface card.
    4. Bad fiber-optic cable.

Similar Threads

  1. Milltronics Centurion IV DNC?
    By papp101 in forum Milltronics
    Replies: 11
    Last Post: 01-04-2014, 03:57 AM
  2. vs-606v7 vector drive error in a milltronics centurion 6 HELP
    By bestrada11 in forum Phase Converters
    Replies: 0
    Last Post: 07-14-2011, 02:12 AM
  3. Replies: 37
    Last Post: 01-27-2011, 08:10 PM
  4. Milltronics Centurion 5 450 error Help!
    By Footie11 in forum Milltronics
    Replies: 1
    Last Post: 11-15-2010, 10:04 PM
  5. Milltronics Centurion Six
    By CUTRITE in forum Milltronics
    Replies: 10
    Last Post: 10-13-2006, 07:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •