584,808 active members*
5,362 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2018
    Posts
    9

    Extended Z Axis

    I need to use the area above the CS Position for clearance, Do I need to use the Set Ho Command? It has the Extended Z Axis.

  2. #2
    Join Date
    Oct 2008
    Posts
    1632

    Re: Extended Z Axis

    You could set the second home then use G28, or just use G28 then a G91 Z3.0
    That would go to CS Z0 then go up another 3" right?

  3. #3
    Join Date
    Apr 2018
    Posts
    9

    Re: Extended Z Axis

    Ill give that a try ..Thanks

Similar Threads

  1. G0704 extended Y axis??
    By Jim27 in forum Benchtop Machines
    Replies: 8
    Last Post: 12-26-2014, 03:11 AM
  2. Extended Y axis
    By Twingy in forum Taig Mills / Lathes
    Replies: 65
    Last Post: 09-23-2011, 10:55 PM
  3. Extended X-Axis X2 Done!
    By Tallen in forum Benchtop Machines
    Replies: 1
    Last Post: 09-25-2009, 08:30 AM
  4. X2 extended X and Y axis
    By eartaker in forum Benchtop Machines
    Replies: 12
    Last Post: 09-04-2009, 09:14 AM
  5. Building a CNC mill based on X1 parts / extended axis kits
    By Qwerty256 in forum Benchtop Machines
    Replies: 11
    Last Post: 04-29-2007, 12:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •