584,800 active members*
4,543 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > Y axis not repeating
Results 1 to 2 of 2

Threaded View

  1. #1
    Join Date
    Dec 2016
    Posts
    2

    Y axis not repeating

    Hello all. I have a fineline automation cnc router with a gecko 540 ESS warp9 smooth stepper and I finished my build however my y axis does not repeat. When cutting around a rectangle the X is fine but the Y loses about .05 per pas but not on a constant basis. I have Mach 4 set at 1735 steps per with velocity of 400 and accel of 25. My machine had linear guides and a rack and pinion. I'm lost and any help would be greatly appreciated
    Attached Thumbnails Attached Thumbnails A9A70422-FCFF-44F5-96E9-985645A567ED.jpg   0AE88D62-BBF2-4F3D-A48E-E9F69538A995.jpg  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •