584,866 active members*
5,347 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > PlasmaCam > Plasma cam will not move down on z axes
Results 1 to 1 of 1
  1. #1
    Join Date
    Jul 2018
    Posts
    1

    Plasma cam will not move down on z axis

    Plasmacam table will not move z axis down it will move up on z axis during cutting the plasma torch will randomly raise up 6 inches but continues to move like it's cutting I had to stop the plasma cutter and bring the torch back down with manual control did it to me 3 times now it won't move down not even with manual controls. Any suggestions?
    Last edited by Twilla57; 07-30-2018 at 12:51 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •