As from the other thread about the factory clean up,the owner, a friend of the family is still running a ISAC SAB9500 CNC for a diamond wire granite cutter , the manufacturer has gone bankrupt a long time ago (michelleti) and there are no manuals.I'm not as much intrested in the CNC software as such , but more in the shematics of the machine ...reason...
I had a quick look inside and got 'very' scared as the 'heart' of the machine runs from a 486 pc...with some very (at least to me) exotic ISA boards with cables running tough the main cabinet...
I tought I' might ask , since asking doesn't hurt :-).
regards,
Luc
Thread: ISAC SAB9500
Results 1 to 2 of 2
-
11-08-2009, 12:09 AM #1
Registered
- Join Date
- Nov 2009
- Posts
- 6
ISAC SAB9500
-
10-15-2020, 02:44 AM #2
Registered
- Join Date
- Feb 2009
- Posts
- 3
Re: ISAC SAB9500
Hey hello,
This is a late reply.
Why scared of a 486, this work well and is stable.....Why you want to have a Bugatti of a computer when you need to a tractor to do the real work?????
even this one is too fast for the machine.
I have machines with such a computer and even replaced it with an lder NUM cnc...186 processor....
Same speed of work, very robust....
Reply With Quote
