500,733 active members
4,470 visitors online
Register for free
Results 1 to 1 of 1
  1. #1
    Junior Member
    Join Date
    Jan 2019

    cambam with Syntec 6mb controler

    Hello, I'm French excuse my approximate English
    I have a chninese cnc omnitech 2040 with tool changer and I use cambam, is there a post processor for syntec 6mb ?? because I can not operate the tool change in the gcode, or I have a problem in the machine.
    I explain to you when I create toolpaths with change , the machine does not compensate my different heights from a tool to the other.
    Do you have an idea of the problem or have you already met
    Thank you

  2. #2
    Join Date
    Sep 2012

    Re: cambam with Syntec 6mb controler

    your post processor has to insert a tool length compensation command.. with a reference to the tool table.. so it knows how much to compensate.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts