496,083 active members
6,809 visitors online
Register for free
Login
496,083 active members
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    May 2013
    Posts
    226

    computer requirements

    I am looking at upgrading the pc to handle the tool pathing better and quicker . I currently have a i5 3.4 ghz 8gb 64bit windows 7 with no video card , it is way too slow if I make the tolerance in madcam at 0.001mm .

    I think part of the problem is the step over sizes I use to get the finish needed .... usually in the range of 0.02mm step over with a 0.1mm cutter and up to 3 million lines of code

    any suggestions?

    thanks

  2. #2
    Registered
    Join Date
    Mar 2010
    Posts
    61

    Re: computer requirements

    I would suggest writing RhinoScripts to automate your madCAM toolpath generation.

    I also have very long finishing passes but I've automated the whole madCAM process including saving the g-code file when madCAM is finished. My files typically take 40 minutes or longer to finish but they run unattended.

    I learned about scripting madCAM from this video:


  3. #3
    Community Moderator svenakela's Avatar
    Join Date
    Mar 2004
    Posts
    1644

    Re: computer requirements

    Buy an i7 processor and buy that video card. It will make a good difference.
    My initial thought though, is why do you generate paths with 0.001 tolerance and 0,02 steps? Do you create nano tube molds?!

Similar Threads

  1. Replies: 8
    Last Post: 08-20-2014, 07:16 AM
  2. Computer hardware requirements
    By jdcoving in forum Vectric
    Replies: 2
    Last Post: 06-21-2012, 04:33 AM
  3. Computer Requirements for CAM Software?
    By Jesse B in forum General CNC Machine Related Electronics
    Replies: 4
    Last Post: 12-28-2009, 12:14 AM
  4. G-rex with mach 4, Computer requirements?
    By crazyman in forum Mach Software (ArtSoft software)
    Replies: 4
    Last Post: 11-17-2005, 02:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •