hello
i need a mastercam postrprocessor for weeke because now i work with homag woodwop 5 for generate the .nc code but it don´t have much posibilities for 3d machining
sorry for my bad english
hello
i need a mastercam postrprocessor for weeke because now i work with homag woodwop 5 for generate the .nc code but it don´t have much posibilities for 3d machining
sorry for my bad english
There are lots of post processors available for Mastercam directly from CNC Software but you need to go through your Mastercam reseller to get them.
Give the Mastercam reseller a call. I am sure they can help you.
Hallo,
The most mastercam dealer sells postprocessores for homag and Weeke machines. The big problem: They posts only universalmakros (G-Codes). If you get more, you need a professional postprocessor. I did develope together with our mastercam-dealer a really good postprocessor: All WoodWop-Makros are possible. If you have any interest send me a message. Also I can send you are example as mpr-file.
Greetings from Germany.
Do you have a postprocessor for HOMAG BAZ 10 program woodwop 2.5 Homatic 2000
greeting
Zorane,
pokušao sam ti poslati odgovor na PP ali iz nekog razloga nije moguće.
Pozdrav,
S.M.
aluplastvz et yahoo.com
pozdrav zoran
Hi there
our floppy disk was broken on our weeke BP15 homatic 2000.
Does anyone have experience with USB-floppy emulator installing on weeke BP15 homatic 2000. I bought Gotek emulator and have problems with installing. i install it on my desktop PC like 1.44MB 3.5" and after that I try install it on weeke machine without success.
on machine display i can read OS-9/68KB floppy Disk type is 5" floppy (but in reality i see 3.5")
Sectors/tracks = 32
min. sect allocation = 8
...
i have picture of this screen.
can anyone advice?
thanks