500,733 active members
4,483 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Mar 2018
    Posts
    64

    idlers and shaft support

    I'm wondering if supporting both sides of a shaft is the best way to go or if using an idler bolt or relying on the motor bearings better. It seems that unsupported idlers are very common in 3d printers and on drive pulleys for belt reduction on cnc machines. Is cost the main reason the shaft is supported on only one side?

  2. #2
    Registered
    Join Date
    Jun 2011
    Posts
    669

    Re: idlers and shaft support

    Usually supporting a pulley shaft from both sides traps the belt, making service a pain.

Similar Threads

  1. Replies: 0
    Last Post: 07-27-2013, 06:44 AM
  2. shaft support bearing placement
    By dsc in forum Mechanical Calculations/Engineering Design
    Replies: 0
    Last Post: 11-29-2009, 10:53 PM
  3. shaft support
    By smarbaga in forum Mechanical Calculations/Engineering Design
    Replies: 0
    Last Post: 04-17-2005, 02:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •