My 110v 800w air cooled spindle will not spin. It's got less than 10hours of use. Is there a way I can bypass the VFD and power the spindle to prove that it's the spindle and not the VFD.?
Thread: Spindle not working
Results 1 to 20 of 22
Threaded View
-
01-11-2019, 09:32 PM #1
Registered
- Join Date
- Mar 2018
- Posts
- 16
Spindle not working
Reply With QuoteSimilar Threads
-
MC6VAE Alarm A 109 Spindle drive unit, spindle break not working
By cyber7 in forum OkumaReplies: 0Last Post: 11-30-2018, 09:54 AM -
Spindle Not Working
By mussersail in forum Avid CNCReplies: 6Last Post: 03-18-2018, 12:51 PM -
mach3 spindle dro not working, spindle speed changing while jogging and running code
By jasminder in forum Mach Software (ArtSoft software)Replies: 0Last Post: 02-23-2011, 07:12 AM -
Spindle not working on X3
By EugeneJohn in forum Benchtop MachinesReplies: 0Last Post: 03-29-2010, 03:33 PM -
Spindle not working on X3
By EugeneJohn in forum Mach MillReplies: 0Last Post: 03-24-2010, 09:13 PM
Tags for this Thread
Posting Permissions
