Hi , I have a QT10 T Plus. It starts up ok and runs in AUTO for about 10 minutes then it stops an I get alarm TRIP Breaker and Emergency stop. Does anyone know what would cause this.
Thread: Mazak QT10 T Plus Breaker trip
Results 1 to 4 of 4
-
01-13-2019, 12:20 PM #1
Member
- Join Date
- Jul 2010
- Posts
- 62
Mazak QT10 T Plus Breaker trip
-
01-20-2019, 04:53 AM #2
Junior Member
- Join Date
- Sep 2012
- Posts
- 216
Re: Mazak QT10 T Plus Breaker trip
Have you checked all the breakers??
Regards Bob
-
01-20-2019, 10:19 AM #3
Member
- Join Date
- Jul 2010
- Posts
- 62
Re: Mazak QT10 T Plus Breaker trip
Hi Bob, I have checked all breakers. It does start ok and runs for up to 10 minutes before I get "trip breaker" alarm. It will then not start again for at least 2 hours. I do not reset any breakers. I have reseated all the boards and connectors. Thanks , Chris.
Originally Posted by sudsy
-
02-23-2019, 07:54 AM #4
Registered
- Join Date
- Sep 2017
- Posts
- 139
Re: Mazak QT10 T Plus Breaker trip
Hi murphy.. Please share the led status on all the drive units Originally Posted by murphyc1
"Drive model" - "Axis Name" - "2 digit alarm code on drive"
Reply With QuoteSimilar Threads
-
MAZAK QT10
By pezboyz28 in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 07-17-2014, 12:32 PM -
mazak qt10 t2
By gasserman in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 11-19-2012, 02:02 PM -
Mazak QT10
By motter71 in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 06-27-2012, 10:53 AM -
Mazak QT10 T1
By Andycnc in forum Mazak, Mitsubishi, MazatrolReplies: 8Last Post: 02-09-2010, 08:58 PM -
MAZAK QT10 T-2
By STEVEN911 in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 10-05-2008, 02:21 PM
Tags for this Thread
Posting Permissions
