584,812 active members*
5,443 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1

    Techno Series 400 ATC swap.

    Hi Guys,
    I purchased a Turnkey Techno LC 3024 a few months back.
    Love the desktop machine, but would like to replace the HSD non tool changing spindle with an ATC.
    I'm assuming that you will be able to re-pin the spindle connection and find the connection
    for the ATC air solenoid on the control board and you are good to go? Any one know if there is thread on this?
    I looked at what ever is available on the Techno web with little luck. Thank you in advance, Otto

  2. #2
    Join Date
    Sep 2012
    Posts
    214

    Re: Techno Series 400 ATC swap.

    Otto,

    We can help with this. We specialize in the original USA made Techno equipment.

    There is a dedicated extra control board for the toolchangers on Techno machines (we have stock), and can provide the rest of the info you'll need to get it going. Contact us from the form on our website at Armor CNC or call the number listed there.

    Regards
    Eric
    Eric Feldman - Design Engineer, Programmer
    Armor CNC - http://www.armorcnc.com Support hours: 7am thru 10pm EST, 7 days a week

  3. #3

    Re: Techno Series 400 ATC swap.

    Thanks Eric,
    I just left a message for you. Here is a couple pictures.
    One is the Machine and new ATC spindle. The other is the I/O Riser card.
    There are two connection points One is marked Spindle, one Coolant.
    Coolant relay is simple enough.
    Could this "Spindle" be the low voltage for the solonoid?

  4. #4
    Join Date
    Sep 2012
    Posts
    214

    Re: Techno Series 400 ATC swap.

    Hello,

    I didn't see a message. How did you send it?

    Spindle is not for the solenoid. That's for spindle speed control. You don't have the board for toolchanger sensors/solenoid control. You can get it from us if you like.
    Eric Feldman - Design Engineer, Programmer
    Armor CNC - http://www.armorcnc.com Support hours: 7am thru 10pm EST, 7 days a week

  5. #5

    Re: Techno Series 400 ATC swap.

    Eric,
    left you a voice mail.

Similar Threads

  1. Bridgeport Series 1 BOSS-5 electronic controls for sale or swap
    By cnc1000 in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 10-10-2014, 06:43 PM
  2. techno hd series 3phase
    By M.Abid in forum Commercial CNC Wood Routers
    Replies: 7
    Last Post: 01-19-2014, 11:53 AM
  3. Techno CNC Router HD Series
    By M.Abid in forum Commercial CNC Wood Routers
    Replies: 5
    Last Post: 12-06-2013, 06:57 AM
  4. anilam crusader m series swap with 1100s
    By Jetpylot33 in forum MetalWork Discussion
    Replies: 0
    Last Post: 11-08-2008, 05:42 PM
  5. Techno CNC LC Series Rotary
    By layertone in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 11-08-2005, 06:52 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •