Hi I have a Hitachi Seiki 4Ne 6T micon 8 if that makes sense.
I am not an electrical engineer.
I started the machine first thing the other morning and it comes on, I push standby and the hydraulics work but it stays in not ready.
I have had a cnc engineer on this 3 days now and still no clue
What we have found
The 3 fuses on the x axis control 1.3amp had blown
The mico 8 was flashing dashes.
What we have done is new battery's in the micon 8 and put the factory perimeters back in to the mico8 I now have zero's on the display
we have now swapped the x and z sero packs for known good ones.
The servo packs are not powering up
I feel that is just something stupid and It is costing me a fortune.
Anyone have any idea's
Paul