584,837 active members*
5,677 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Deckel, Maho, Aciera, Abene Mills > Deckel maho 80U (1999) millplus E252 error
Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2012
    Posts
    23

    Deckel maho 80U (1999) millplus E252 error

    I have got this E252 alarm (tool in toolchangerarm).
    Its not possible to do a toolchange with M6, but if i do a M66 (manual change) and then a M6 directly after the ATC will work once.
    Any suggestions to fix this?
    I have tried the I/O recovery of toolchanger but too no help.

  2. #2
    Join Date
    Oct 2018
    Posts
    11

    Re: Dmg mori 80U (1999) millplus E252 error

    Hi, this just says there is a tool in the tool gripper, depending on the version of machine, you may have a proximity switch on the gripper giving you an incorrect status. Check and see if there are any proximity switches on the tool changer monitoring the grippers and let me know.
    Cheers

  3. #3
    Join Date
    Jul 2008
    Posts
    7

    Re: Deckel maho 80U (1999) millplus E252 error

    hello,
    Please, have you debug alarm E252 ?
    I m from Romania and I have the same problem like you.
    In fact after parameter loose , I reload all parameters and after restarting when I set M 6 or M66 I have E252 (tool already in gripper) but my DMU50V dont have gripper tool changer !!!
    Thank you for helping,
    Ion

  4. #4
    Join Date
    Feb 2020
    Posts
    18

    Re: Deckel maho 80U (1999) millplus E252 error

    Hello ,

    I am also getting this error E252 tool in toolgripper alarm ( DMU 60T - Millplus 1999 model)
    After loading parameters & BIOS in battery problem.
    No sensor in tool gripper. Checked all PLC IOs , its ok.
    I think somewhere system memory, gripper has to be reset.
    Please guide for this problem.
    My email is [email protected]

    Regards
    Senthil kumar

  5. #5
    Join Date
    Feb 2020
    Posts
    18

    Re: Deckel maho 80U (1999) millplus E252 error

    please send your email address
    i am getting your same message alarm.

  6. #6
    Join Date
    Nov 2021
    Posts
    1

    Re: Deckel maho 80U (1999) millplus E252 error

    Hi, Have you found the solution to this problem? I have the same problem.

  7. #7
    Join Date
    Sep 2019
    Posts
    11

    Re: Deckel maho 80U (1999) millplus E252 error

    ANY SOLUTION I HAVE THE SAME PROBLEM

  8. #8
    Join Date
    Sep 2019
    Posts
    11

    Re: Deckel maho 80U (1999) millplus E252 error

    I managed to solve the E252 error.

    I turned the machine on and press delete.
    Then heidenhain numeric service menu appeared.
    From there i selected 6. Load default machine constants and clear all memories.
    After I needed to import all machine parameters.

Similar Threads

  1. Millplus error
    By bassplayerfred in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 11-24-2018, 10:47 AM
  2. Millplus error X15+
    By fsa in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 09-14-2018, 07:31 AM
  3. DMU 50V Millplus error E60
    By paris in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 5
    Last Post: 06-01-2017, 09:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •