508,555 active members
4,190 visitors online
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Raspberry Pi CNC > Needing some help with the Workspace issue in BCNC.
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Sep 2016
    Posts
    11

    Needing some help with the Workspace issue in BCNC.

    I am having a couple of workspace issues. The picture and a video can show you the problems I am having.


    https://youtu.be/aGJoZHJsnC0

  2. #2

    Join Date
    Jan 2005
    Posts
    10446

    Re: Needing some help with the Workspace issue in BCNC.

    Quote Originally Posted by usajet View Post
    I am having a couple of workspace issues. The picture and a video can show you the problems I am having.


    https://youtu.be/aGJoZHJsnC0
    Check your drawing that the X0Y0 is at that point where you want it to start, then when you create the cam file that will be the start point

    Once you home your machine if you do, you then move your tool to the start point of your X0Y0 and Zero the dro for X and Y axes this is then you work offset G54 then you set you Z axes the same way to the top of your work piece and Zero that as well, your first line of code will have X0Y0 your startpoint
    Mactec54

  3. #3
    Registered
    Join Date
    Sep 2016
    Posts
    11

    Re: Needing some help with the Workspace issue in BCNC.

    Quote Originally Posted by mactec54 View Post
    Check your drawing that the X0Y0 is at that point where you want it to start, then when you create the cam file that will be the start point

    Once you home your machine if you do, you then move your tool to the start point of your X0Y0 and Zero the dro for X and Y axes this is then you work offset G54 then you set you Z axes the same way to the top of your work piece and Zero that as well, your first line of code will have X0Y0 your startpoint
    I will check the drawing again and verify my zero's are in the right spot. Thank you mactec.

Similar Threads

  1. Another Master Desay xp 380p issue - Velocity Control
    By airbrush in forum Printing, Scanners, Vinyl cutting and Plotters
    Replies: 0
    Last Post: 01-22-2019, 04:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •