584,808 active members*
5,362 visitors online*
Register for free
Login
IndustryArena Forum > Material Technology > Hard / High Speed Machining > Variable Programming - Critique My Code, Please
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2015
    Posts
    17

    Variable Programming - Critique My Code, Please

    I've attached the blueprint of the part to be made and my code to machine the 5 slots in the OD. My goal is to have a program that regardless of the tool diameter, programmed radius or # of passes/DOC can be changed with relative ease. I'd like to make #527 passes where each pass is #528/#527 deep (the actual DOC is [#528/#527]/2 because the Y axis is diametrical).
    I've never used variables to this extent so I'm hoping y'all will look it over and critique my code.


    In the program I accounted for the key cutter tool radius when I programmed the tool path, so the R value on the offset screen=0.


    I'm cutting on the minus(-) side of Y0.


    Thanks in advance!
    Attached Thumbnails Attached Thumbnails DWG1.jpg   DWG2.jpg   DWG3.PNG  
    Attached Files Attached Files

  2. #2
    Join Date
    Jun 2015
    Posts
    4131

    Re: Variable Programming - Critique My Code, Please

    hi, if you are still intersted into this, i may try to help ... but i can't download the code, and i can't see the picture, so re-post them if you wish / kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •