584,879 active members*
5,427 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > MetalWork Discussion > Looking for Machining Suggestion
Results 1 to 2 of 2
  1. #1

    Looking for Machining Suggestion

    I am looking to machine a 2m diameter ring at 6 mm thickness with thread like cut out on the internal surface of the ring. What are some of the methods available to create this part? The 3D PDF and the technical drawing are attached.

    Any suggestions or pointers will be greatly appreciated!

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: Looking for Machining Suggestion

    Quote Originally Posted by wangweichung View Post
    I am looking to machine a 2m diameter ring at 6 mm thickness with thread like cut out on the internal surface of the ring. What are some of the methods available to create this part? The 3D PDF and the technical drawing are attached.

    Any suggestions or pointers will be greatly appreciated!
    Could be machined if the ring was held in a fixture, or you extruded the single profile then rolled it into the ring you wanted

    What is the material the second PDF did not show anything
    Mactec54

Similar Threads

  1. Machining error with offline controller DDCSV2.1
    By rishrsoni in forum Controller Cards
    Replies: 6
    Last Post: 06-05-2019, 01:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •