584,817 active members*
4,893 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > CNC Plasma / Oxy Fuel Cutting Machines > Help me please! Plasma cutting with -1.5 mm of error
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2019
    Posts
    1

    Question Help me please! Plasma cutting with -1.5 mm of error

    Hi guys

    I have got a table smart 2 Steel Tailor with SF-AH200 controller, running a hypertherm 105. The problem with the machine is that the external cuts are always 1.5 mm to 1.7 mm smaller than the programmed one, if I program a square of 100 mm x 100 mm the result is 98.5 mm x 98.5, I have already verified the parameter "Numerator" and it's fine because the interior cuts are good and distances between centers.

    What should I adjust in the control to solve this? Do you have any idea?

    Thank you
    Attached Thumbnails Attached Thumbnails WhatsApp Image 2019-01-29 at 11.39.39 AM.jpg   WhatsApp Image 2019-01-29 at 11.39.40 AM (1).jpg   WhatsApp Image 2019-01-29 at 11.39.40 AM (2).jpg   WhatsApp Image 2019-01-29 at 11.39.40 AM.jpg  

    WhatsApp Image 2019-01-29 at 11.39.41 AM.jpg  
    Last edited by disenoproyectos; 01-29-2019 at 05:42 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •