584,841 active members*
4,543 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC Machining Centres > Miyano BNC-34S with Fanuc 0-t control missing Parameters
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2019
    Posts
    1

    Miyano BNC-34S with Fanuc 0-t control missing Parameters

    Do you have NC and PMC parameters for Miyano BNC-34S with Fanuc 0-T? We had accidentally reset the parameters and the displayed axis on the monitor becomes only two when it originally had 3 axis(X,Z,B). We dont have access to Fanuc MTB or PC software connectors. We neither have any backups as it was the only Miyano CNC we had. Here's my email if you can send any reference [email protected] . Hope you can help. Thanks.
    Attached Thumbnails Attached Thumbnails IMG_20190123_131106.jpg   IMG_20190123_104048.jpg   IMG_20190123_104641.jpg   IMG_20190123_104709.jpg  

    IMG_20190123_104748.jpg  

  2. #2
    Quote Originally Posted by dxhop03 View Post
    Do you have NC and PMC parameters for Miyano BNC-34S with Fanuc 0-T? We had accidentally reset the parameters and the displayed axis on the monitor becomes only two when it originally had 3 axis(X,Z,B). We dont have access to Fanuc MTB or PC software connectors. We neither have any backups as it was the only Miyano CNC we had. Here's my email if you can send any reference [email protected] . Hope you can help. Thanks.
    Dear, I dont have parameters but have some manuals i think. Regards, Umair

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •