Hello,
This is my first post so please excuse the basic questions.
I need to cut two types of materials so they can be different technologies if needed.
1st is to cut acrylic 3mm - 5mm thickness
cutting bed needs to be around A3-A1 (min requirement)
I have looked at normal plotter lazer for this task
2nd is to cut paper/card/glitter (80gsm-400gsm)
cutting bed needed for A4 (min requirement)
I have looked as galvo laser for this task
I am based in UK
I am looking for the equivalent of trotech and epilog from cheaper manufacturers as the high end branded machines are out of my budget at the moment.
Thank you for help.