Our cam and or code wizard versions are different - still no % at top of program. The files you modified will not open with our version of code wizard.
Can you tell me what you changed maybe we do it here.
Our cam and or code wizard versions are different - still no % at top of program. The files you modified will not open with our version of code wizard.
Can you tell me what you changed maybe we do it here.
I will try
1. Under “Chavalier Mill --> NC Style, G-Codes and Modality --> Set Up Sheet
Turn ON the "Output Setup Header / Trailer"
2. Under “Chavalier Mill --> NC Style, G-Codes and Modality --> Code Constructors --> NC Program General --> Set-Up Header
Delete all the text in the output bar and plase the % symbol
3. Under "Chavalier Mill --> NC Style, G-Codes and Modality --> Code Constructors --> NC Program General --> Set-Up Trailer
Delete all the text and leave it empty
Then save it and compile. Then run out an code and check it
Good luck!
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
Don't think this is the most correct way to do it, but i think it will work. The % symbol should be in the top in the "Program Start" but the tool list is been posted out before that...
So that is because i put it in the Header text...
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
AHH Yes!!! May I heap praise upon you, I am not worthy...
Output looks just like we want it.
The reason for all this is our DNC software does not want to see anything above the % character
we don't like editing programs
we still want our operators to be able to see the tool descriptions list
Thanks
Perfect! Thanks!
I understand that
- Robert
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html