496,262 active members
6,753 visitors online
Register for free
Login
496,262 active members
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2013
    Posts
    1

    DECKEL 100V Gear at wrong position.

    Hello colleagues ! I have some problem with my DECKEL 100 V CNC Milling machine. While I manipulate the axis manually, machine can stop and error appears - GEAR AT WRONG POSITION. Also It can appears while the machine do nothing. In the program running mode it never happen. I can not find this failure in users manual.
    What does it means? Where I need to search the problem? Does anybody know?
    Attached Thumbnails Attached Thumbnails 20190201_153634.jpg  

  2. #2

    Re: DECKEL 100V Gear at wrong position.

    Not sure I can help but can give you some generic info. First I want to say that Deckel you have (like most Deckels) is a pretty cool looking machine.

    Ignore this if you don't have a two or three speed geared head, or any gearboxes on your machine.

    I'm thinking that a sensor or position switch that verifys a successful gear change (possibly labeled CS1) located on or around the gearbox, has gone slightly out of adjustment or has a loose wire causing it to become intermittent.

Similar Threads

  1. XY axis wrong position
    By buhajus in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 09-06-2018, 06:34 PM
  2. Replies: 2
    Last Post: 03-02-2016, 09:10 PM
  3. Wrong tool position
    By jorgehrr in forum Fanuc
    Replies: 6
    Last Post: 06-18-2015, 10:34 PM
  4. wrong Z position when posting
    By heathj in forum BobCad-Cam
    Replies: 0
    Last Post: 04-03-2013, 11:54 PM
  5. Tool Offsets - What's wrong with this Gear?
    By edo in forum G-Code Programing
    Replies: 13
    Last Post: 09-25-2012, 03:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •