[ACP]

Hi guys I run an arrow with an A2100. I used a win7 laptop until recently to transfer files through LAN but the lappy bit the dust. I was wondering if anyone knows how I could setup a network with a win10 desktop through wifi. A2100 goes to router and router is is visible on my win10 but not the cnc. Thanks.

[ikjake]

I know this is a bit of an old thread but hope this may help someone out. If you have the A2100 already working on your Lan. It was typically set up on the machine for "Workgroup" in Network settings to work with older Windows OS versions. All I needed to do was on the machine join "Homegroup". Win 10 doesn't use groups anymore but it does recognize "Homegroup". It works to get Win 10 to see all the old computers on our network.