508,515 active members
2,885 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Viper Servo drives > Viper 200 MPG Step Issue
Results 1 to 2 of 2
  1. #1
    Triump1
    Guest

    Viper 200 MPG Step Issue

    Hi guys,

    When I step the wheel on my mpg, the table starts to move. However, if I turn the wheel so it clicks once, the table will move slowly. If I turn the wheel another click the table speeds up. So every time I turn the wheel, it increases the speed of the table instead of indexing the table one position as indicated in the hand wheel.

    Anyone have any ideas on why this is happening. I have tried everything A can think of.

    Thanks

  2. #2
    Company Representative
    Join Date
    Feb 2007
    Posts
    942

    Re: Viper 200 MPG Step Issue

    What controller are you using ?
    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com

Similar Threads

  1. Viper 200 issue
    By jacklegjim in forum Viper Servo drives
    Replies: 1
    Last Post: 12-18-2018, 12:54 AM
  2. would Step Angle be an issue for changing stepper motors
    By gokhanduman in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 07-19-2017, 06:35 PM
  3. Seems Z and A axis are not running...Motor issue or Step/Dir issue?
    By Cattle in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 04-12-2016, 08:51 PM
  4. Viper 200 Issue
    By Trucks in forum Viper Servo drives
    Replies: 1
    Last Post: 12-20-2011, 04:09 AM
  5. LARKEN viper.100 (step/dir) on EMC2
    By krummigudna in forum LinuxCNC (formerly EMC2)
    Replies: 0
    Last Post: 06-08-2008, 09:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •