I have a surplus 3kw kawasaki servo. I can't find a spec sheet for it anywhere but its listed on the label as being 3kw, AC200V, 18.5 amp, type: 3MC302G-3DRAE-KJ1B2.
I intend to use it as a spindle motor on a CNC knee mill. I am using a KFLOP/KANALOG so I can control it with analog, PWM, serial, step/dir etc and can close the loop outside the drive if needed.
Based on what I know from the label I am thinking something with a max continuous rating of 25 amps would be good such as this: https://dpk3n3gg92jwt.cloudfront.net...eet_B50A20.pdf run from rectified 120v.
Any input is appreciated.
Thanks.