[precisionatl]

Good Morning,
I have a older vintage Cincinnati arrow 500 with the A2100 control. The machine wont boot up any more and we have determined that the work station boards Dallas chips battery has finally died. We have bypassed it with an external battery pack. And we are now trying to reset the BIOS to the factory setting so it will boot properly. If any one would be able to share a photo of the settings I would greatly appreciate it!
Part # 3-424-2123A REV: A

[tspiszak]

https://www.dropbox.com/sh/2jo...AAC...Kk9QpNKIa?dl=0

Sent from my D5803 using Tapatalk

[maver1ck]

If you still need the config for your WS board send me a PM with an email address and I'll send you the configuration.

[SanPedro_]

If you still need the config for your WS board send me a PM with an email address and I'll send you the configuration.

Hi, I have tried to PM you my email address but it gives me an error that you have them disabled.
Please, send me a PM with an email address so I can comunicate with you.
Thank you.

[Kumanov]

If you still need the config for your WS board send me a PM with an email address and I'll send you the configuration.

hello, maver1ck, I need your help (mean for repair) but on your profile info, there is no "pm send" possibility.

How can I write to you to explain what the problems are?

[tspiszak]

https://www.dropbox.com/sh/531lvwcl5...WjplEM1Wa?dl=0


Sent from my D5803 using Tapatalk

[maver1ck]

Sorry for the delay but for some reason account had to be reverified before it would let me do anything, but they didn't inform me of that so I was locked out for weeks trying to get it sorted.

PMs should be working again