584,841 active members*
4,866 visitors online*
Register for free
Login
Page 1 of 2 12
Results 1 to 20 of 39
  1. #1
    Join Date
    Jan 2016
    Posts
    78

    Drag Chain Cable Management

    I built my 60120 using the supplied 75x25mm & 50x25mm drag chains. I have a total of 12 cables running in my main drag chain (4 x 6mm encoder cables, 4 x 10mm servo power cables, 3 x 6mm proximity sensor cables z, x+, x-, 1 x 15mm VFD flex cable).
    It's pretty crowded in there !

    Looking at the more expensive and industrial drag chain solutions ( I got quoted US$600 for a 150x30mm chain!) you can have 2 layers of cabling, segment the wiring so it doesn't tangle up and cross over.

    Wondering if 3D printing the following inserts, or cutting them out of a foam material is an effective way to avoid problems of cable wear, binding cables etc ?


    Attached Thumbnails Attached Thumbnails Insert.png   75x25mm Chain Insert v9.jpg  

  2. #2
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management




    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management




    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Mar 2003
    Posts
    35538

    Re: Drag Chain Cable Management

    One more reason to get a 3D printer. :cheers:
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  5. #5
    Join Date
    Jan 2015
    Posts
    194

    Re: Drag Chain Cable Management

    Love it. Had no clue where that thing was going and thought, how does he connect them to make a drag chain but now it is clear. Nice!

    Can you take a picture with the drag chain support popped up and away? And could you post a picture with some general dimensions such as length, width, thickness, and dimensions of the wire channels?

    Thanks for sharing. Really good idea.

  6. #6
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    I will put the STL files on thingiverse later. Wasn’t sure if people were interested but kept going with the idea.

    I’ve now got inserts for the 50mm wide chain and the 75mm wide chain so you can do the lot.

    I’ve put about 15 of them on the 75mm chain and the spacing seems to work ok.




    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management


  8. #8
    Join Date
    Jan 2015
    Posts
    194

    Re: Drag Chain Cable Management

    Thanks so much Andrew. Looks great! I've already downloaded and will comment when I've had a chance to print.

  9. #9
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    Here’s the little ones




    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Jun 2017
    Posts
    369

    Re: Drag Chain Cable Management

    Is there room to add any additional cables? I have an led ring on my dust shoe so I can light up my spindle & see what is going on

  11. #11
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    If you’re using steppers you don’t have encoder and power cables per motor.. should have plenty of space on the 75mm insert

    There’s a spare wire slot on the 50mm insert even for me.

    There’s a detailed info on my thingiverse page


    Sent from my iPhone using Tapatalk

  12. #12
    Join Date
    Jun 2017
    Posts
    369

    Re: Drag Chain Cable Management

    I don't have a 3d printer yet so I'll need to get a quote on someone printing them for me, unless they can be routed

  13. #13
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    Quote Originally Posted by Gary-Wiant View Post
    I don't have a 3d printer yet so I'll need to get a quote on someone printing them for me, unless they can be routed
    I don't think it would be too hard to machine this out of a block of nylon.
    Let me know if you have trouble figuring out dimensions for what you need.

    But on Thingiverse someone can print them for you (for a fee).

    Andrew

  14. #14
    Join Date
    Aug 2017
    Posts
    34

    Re: Drag Chain Cable Management

    Dear God. My cable-management fetish is... well, let's not go there. Just a HUGE thank you!!!!

  15. #15
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    Glad it’s been useful to you.. also found some 4080 profile cable clips on thingiverse that are brilliant for routing cables


    Sent from my iPhone using Tapatalk

  16. #16
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    And I also have made a bolt on tray for your touch plate and an Xbox controller holder


    Sent from my iPhone using Tapatalk

  17. #17
    Join Date
    Jun 2017
    Posts
    369

    Re: Drag Chain Cable Management

    I tried to sign in to thingaverse on my phone but when it comes to inputting my birthday, I need to flip from month to month and it would take a long long time to get back to 1967.

    Has anyone created a bracket to mount their 4" flexable dust hose to the side of the Z bracket?

  18. #18
    Join Date
    Jan 2016
    Posts
    78

    Re: Drag Chain Cable Management

    Something like this ?




    Sent from my iPhone using Tapatalk

  19. #19
    ericks Guest

    Re: Drag Chain Cable Management

    Wow that is some dust extraction!!!

  20. #20
    Join Date
    Jun 2017
    Posts
    369

    Re: Drag Chain Cable Management

    I was thinking more of a C shaped clamp that mounts to the Z and the hose fits Into but doesn't and much weight to the Z. Also I use the dust shoe from Kent CNC

Page 1 of 2 12

Similar Threads

  1. File to make cable drag chain
    By Mike505 in forum MetalWork Discussion
    Replies: 1
    Last Post: 11-04-2015, 09:25 AM
  2. Plasma cable in drag chain?
    By johndjmix in forum Plasma, EDM / Other similar machine Project Log
    Replies: 7
    Last Post: 02-20-2012, 07:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •