584,858 active members*
4,307 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Auto Tool Changer > ATC spindle damaged gripper repair
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2015
    Posts
    2

    ATC spindle damaged gripper repair

    Hello,

    A while ago I bought a used ATC spindle. I didnt needed it immediately so I put it at the rest of the parts, waiting till the moment I could use it for something. At the moment I wanted to try it I noticed that the four finger/petal/gripper was damaged and was having only three fingers left. The runout from the ISO20 holder was way too much, like 0,2mm.

    It seems the gripper is just screwed on the draw bar. Unfortunately it also seems it is not an easy fix.

    Gripper url: https://nl.aliexpress.com/item/ISO20...6167883b73d-27




    This is the spindle: GDL80-20-24Z/2.2









    I also found this thread: https://www.cnczone.com/forums/omni-...24z-2-2-a.html

    Unfortunately CNCzone didnt allowed me to post anything overthere.


    Is there somebody who can tell me more about repairing this spindle?

    Already thanks!

  2. #2
    Join Date
    Nov 2015
    Posts
    2

    Re: ATC spindle damaged gripper repair

    Or is somebody having some drawings from this spindle maybe?

Similar Threads

  1. Digital AC Spindle EPROMS DAMAGED
    By jolulank in forum Fanuc
    Replies: 2
    Last Post: 01-31-2015, 02:56 PM
  2. Damaged stepper driver, can some one help me with tips on repair?
    By skyguynca in forum Stepper Motors / Drives
    Replies: 26
    Last Post: 01-01-2015, 12:54 PM
  3. tnc 155, spindle regulator damaged
    By blubberblasentee in forum HEIDENHAIN -> TNC
    Replies: 2
    Last Post: 11-10-2009, 04:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •