584,830 active members*
5,379 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Turning > Cincinnati Cinturn 000399 spindle open loop error
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2019
    Posts
    1

    Exclamation Cincinnati Cinturn 000399 spindle open loop error

    I I have a Cincinnati Cinturn with the Acramatic 850 sx and I am getting a error code open loop on the spindle I’m able to start the spindle and everything sounds good until I get to 275 rpm then the spindle shuts off and the error comes up it always does it at the same rpm being 275 I’m hoping someone has been through this in the manual it says to change the dump board which I have I own two machines toare identical so I switched boards and also switched the resolver cable can anyone help please

  2. #2
    Join Date
    Oct 2020
    Posts
    12

    Re: Cincinnati Cinturn 000399 spindle open loop error

    I think, yes, there is a lot of information here about your problem. Indeed, I saw several familiar to your question topics and specialists that are ready to do it for you. May be if you provide https://somamedicare.com/
    a little more details here, I will have enough knowledge to do it for you. But what is about the experience?

  3. #3
    Join Date
    Oct 2020
    Posts
    12

    Re: Cincinnati Cinturn 000399 spindle open loop error

    I have set up and error questions, and I would bet will need parameters. https://calendardream.com/

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •