hey all, i have an Okuma 852v mill that is controlled by a fanuc 31i. today neer the end of a drilling cycle i got this alarm: EX3019 COOLANT SUPPLY ABNORMAL. the coolant tanks are full of fresh coolant and everything seemed to be working fine up until a few min ago. i AM running a chip blaster thru spindle, and at the time it alarmed out i was runnning 500psi thru spindle. i am unable to find this alarm in any of my books and i am unable to reset it. any help would be great guys and gals. thanks in advance!
Thread: "abnormal coolant"??
Results 1 to 2 of 2
-
01-20-2011, 06:06 PM #1
Registered
- Join Date
- Aug 2010
- Posts
- 188
"abnormal coolant"??
-
12-23-2020, 08:55 PM #2
Registered
- Join Date
- Aug 2010
- Posts
- 188
Re: "abnormal coolant"??
10 year old thread lol...... if you have this alarm come up, check your floats in your tanks (obviously) and if that doesnt solve it check your aux coolant unit (chipblaster or otherwise) for tripped breakers.
Reply With QuoteSimilar Threads
-
LinuxCnc "Step Time" "Step Space" "Direction Hold" "Direction Setup" values??
By blau_schuh in forum Dmm TechnologyReplies: 5Last Post: 01-12-2014, 07:07 PM -
X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
By DaDaDaddio in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-06-2013, 09:59 AM -
Default Plunge feedrates, and "coolant on" questions..
By gearsoup in forum Post Processors for MCReplies: 5Last Post: 05-02-2011, 11:38 PM -
"abnormal coolant"???
By jay_dizzle in forum OkumaReplies: 2Last Post: 01-21-2011, 06:26 PM -
Anyone wish they had a switch for coolant options on the CNC88 "Auto-Off-On"
By LarryNH in forum FadalReplies: 0Last Post: 08-05-2007, 12:11 AM
Posting Permissions
