re-working a tombstone - finally

[samco]

We have a few factory made tombstones from a local shop that went out of business a 20 years ago or so. Finally getting one drilled with a decent pattern of holes..

Have the tombstone mounted and trammed - now adding more holes!

[samco]

G73 cycle to the rescue.. No tangles...

[samco]

[samco]

And this is what happens when you think you got all of the broken center drill out of the hole...

[samco]

Rigid tapping baby!

[deadlykitten]

hy, if you resurected that 20yo tombstone, give it also a nice hair-cut, you know, the trendy tombstone style; check attached

i would preffer starting from the gothic style, and develop : for example, engrave a nice machining quote, like "be one with the mill", and some nice faces, not ghouls, because they don't have high vibration / kindly

[Superman]

hy, if you resurected that 20yo tombstone, give it also a nice hair-cut, you know, the trendy tombstone style; check attached

i would preffer starting from the gothic style, and develop : for example, engrave a nice machining quote, like "be one with the mill", and some nice faces, not ghouls, because they don't have high vibration / kindly

kitty's been sniffing that magic kitty litter again !!!
... and gone floating with the fairies.

[samco]

2 sides done - working on the 3rd..