We have a Fusion Pro and we're trying to cut some vectors in 0.1in polycarbonate. Originally we ran it at 100% power and didn't make it all the way through after 3 cycles but after doing some more googling we ran it at 30%. We ran two full cycles and couldn't get all the way through either.
Here are images of the cuts and the software settings. Obviously the discoloration is a problem we'd like to solve but how many cycles should we expect to un before cutting all the way through?
Many thanks in advance
Joe
Results 1 to 1 of 1
-
12-01-2020, 01:29 AM #1
- Join Date
- Dec 2020
- Posts
- 1
Cutting polycarbonate with Epilog Fusion Pro
Reply With QuoteSimilar Threads
-
Is anyone laser cutting polycarbonate
By Psi For Fun in forum Laser Engraving / Cutting Machine General TopicsReplies: 7Last Post: 03-30-2022, 08:33 PM -
Epilog Fusion M2 75W
By Vegabond in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 02-18-2019, 02:42 AM -
Watermen Cutting of Polycarbonate
By Markcafl in forum Community Club HouseReplies: 2Last Post: 08-12-2013, 12:14 AM -
Cutting polycarbonate
By BuckeyenNJ in forum Laser Engraving / Cutting Machine General TopicsReplies: 9Last Post: 01-22-2011, 10:33 PM
Tags for this Thread
Posting Permissions
