584,837 active members*
5,674 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma lb15 with osp5000l controller HELP!
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2019
    Posts
    2

    Okuma lb15 with osp5000l controller HELP!

    I have created a program by editing a previous program in the edit/aux mode. this has been saved and I can call it in the edit/aux mode.
    however, when I attempt to call this in the auto mode I receive the error (programme end code, error 1)
    can someone please help me work out what im doing wrong

  2. #2
    Join Date
    Feb 2011
    Posts
    353

    Re: Okuma lb15 with osp5000l controller HELP!

    can you get some pictures of the program in the edit mode ?
    otherwise not sure how anyone can help

  3. #3
    Join Date
    Dec 2008
    Posts
    3110

    Re: Okuma lb15 with osp5000l controller HELP!

    does the program proper end with M2 or M30 ?
    do all subs end with RTS (return to start) ? .. subs usually placed after M02/M30

  4. #4
    Join Date
    Apr 2009
    Posts
    1262

    Re: Okuma lb15 with osp5000l controller HELP!

    I’d say Superman is right or else % is before the M2 or M30.
    Experience is what you get just after you needed it.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •