584,830 active members*
5,698 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hitachi Seikis > Enable parameter writing parameter 6219
Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2010
    Posts
    6

    Enable parameter writing parameter 6219

    I have a Hitachi Seiki HT40 lathe with Seicos Multi Interactive control. I am trying to adjust the X axis backlash. I need to enable parameter 6219 by changing from a zero to a 1. It will not change. It appears I have to set a rotary switch on the main circuit board of the control to allow this change to happen.
    I do not have a maintenance manual showing the correct setting to do this. Any ideas?

    Thanks,
    Bud

  2. #2
    Join Date
    Dec 2009
    Posts
    539

    Re: Enable parameter writing parameter 6219

    Bud,
    You shouldn’t have to rotate the switch. As long as you have the parameter write under the SET menu enabled and you’re in MDI mode it should work for backlash settings.

    Let me know (Assuming this is i80 multi)

    John


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Jan 2010
    Posts
    6

    Re: Enable parameter writing parameter 6219

    I did not try to search down under the Set tab. I was looking in the PRM tab. I will give it a try.

    Thanks

  4. #4
    Join Date
    Jan 2010
    Posts
    6

    Re: Enable parameter writing parameter 6219

    Quote Originally Posted by BAFJB View Post
    I did not try to search down under the Set tab. I was looking in the PRM tab. I will give it a try. I tried changing 6219 under the SET tab and it worked great..

    Thanks
    Bud

  5. #5
    We have a selection of manuals for Hitachi Seiki machines including maintenance manuals and parameters.Visit www.cybermachinerysales.com

  6. #6
    Join Date
    Oct 2019
    Posts
    1

    Re: Enable parameter writing parameter 6219

    I have a Hitachi Seiki HT40 lathe with Seicos Multi Interactive control. I am trying to change control from inches to metric.
    I do not have a maintenance manual showing the number of parametr to do this. Any ideas?

Similar Threads

  1. Can't enable TSC parameter
    By Ydna in forum Haas Mills
    Replies: 4
    Last Post: 03-26-2017, 07:00 PM
  2. Fanuc 6mb parameter 600-603 writing problems
    By serickson in forum Fanuc
    Replies: 5
    Last Post: 01-05-2015, 02:59 PM
  3. parameter to enable auto operation with edit key on??
    By chris.spencer in forum Mori Seiki lathes
    Replies: 1
    Last Post: 07-24-2014, 03:31 PM
  4. Replies: 3
    Last Post: 06-25-2012, 08:20 PM
  5. Mazak EIA enable parameter
    By Bakes1 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 01-12-2008, 08:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •