So I have this slab of live edge 2 inch thick walnut about 50 inches long by 9 inches high. I have a planed off and thinking of a lake scene and cabin with name on the right side. Work in progress.
So I have this slab of live edge 2 inch thick walnut about 50 inches long by 9 inches high. I have a planed off and thinking of a lake scene and cabin with name on the right side. Work in progress.
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
That is a beautiful piece of wood.
Looking forward to the results.
Jack.
Thinking about something along these lines.....
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
Or this I think is good, and of course Our Lake Place will be replaced with the Customers Lake Place.... $
48 inches long and finished in clear urethane.
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
I'd cut it in half, and make the text a bit smaller.
It's hard to make something long and narrow look good. Shortening it gives it better proportions.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP