585,931 active members*
3,744 visitors online*
Register for free
Login

Thread: 2 brass pieces milled

Results 1 to 2 of 2
  1. 02-15-2019, 06:42 PM #1
    Mullin
    Mullin is offline Registered
    Join Date
    Jun 2016
    Posts
    5

    2 brass pieces milled

    Hi

    Personal project - I need small two sculptural shapes milled out of brass. maybe best done in 5 axis.

    - Needs to be delivered to Brooklyn for the Monday the 25th.

    - they are prototypes and the stock dimensions can change slightly if needed.
    Currently drawn to 3 x 4 x 6 inch pieces of brass stock.

    - The bases would be clamped for milling then ground off. I have drawn these as separate components in the file.
    link below:

    https://a360.co/2SZTNrC

    Thanks for the quotes,

    Tony
    Reply With Quote Reply With Quote
  2. 02-16-2019, 01:55 PM #2
    ChrisW
    ChrisW is offline Registered
    Send a message via MSN to ChrisW
    Join Date
    May 2003
    Posts
    323

    Re: 2 brass pieces milled

    Link doesn't work.

    Sent from my MHA-L29 using Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Small brass pieces
    By Erik D_lux in forum RFQ (Request for Quote)
    Replies: 12
    Last Post: 12-09-2018, 12:56 PM
  2. Smallish aluminum and brass pieces
    By Erik D_lux in forum North America RFQ's
    Replies: 1
    Last Post: 06-14-2017, 05:27 PM
  3. RFQ - Brass turning two parts 2000 pieces each.
    By R1_pilot in forum North America RFQ's
    Replies: 9
    Last Post: 07-20-2015, 04:21 PM
  4. RFQ: 100 pieces brass disks.
    By tskguy in forum North America RFQ's
    Replies: 9
    Last Post: 02-07-2013, 03:41 PM
  5. Brass pieces to be cut or stamped.
    By Ty G in forum North America RFQ's
    Replies: 0
    Last Post: 10-14-2012, 07:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules