Hello,
I have a really basic question. I'm trying to chamfer the line that is offset from the center line (in the Z axis). I've tried to get rid of the center line, but it doesn't make a difference. Does anybody know what I might be doing wrong? I want to bore with a chamfer on each end. Can't get a chamfer command to work after selecting either line (front or back) in addition to the line offset from Z center.
-Bill
Thread: Newbie From N.W. Indiana
Results 1 to 5 of 5
-
02-16-2019, 05:01 PM #1
Junior Member
- Join Date
- Jan 2017
- Posts
- 3
Newbie From N.W. Indiana
-
02-19-2019, 06:58 PM #2
Registered
- Join Date
- Apr 2017
- Posts
- 5
Re: Newbie From N.W. Indiana
Could not get your attachment to open? Maybe try again.
-
02-19-2019, 08:08 PM #3
- Join Date
- Jun 2018
- Posts
- 362
Re: Newbie From N.W. Indiana
What software are you using?
How are you trying to do this?
A picture/sketch may help.
-
04-12-2019, 07:36 PM #4
Member
- Join Date
- Jan 2019
- Posts
- 74
You are in the Giibbs forum. Let's assume he is using Gibbs.
Originally Posted by he1957
Unsuccessfully
Look at the picture he posted.
-
04-13-2019, 12:13 AM #5
Member
- Join Date
- Jan 2005
- Posts
- 15362
Re: Newbie From N.W. Indiana
How old is your Gibbs Cam Originally Posted by bill_chicago
Hello,
I have a really basic question. I'm trying to chamfer the line that is offset from the center line (in the Z axis). I've tried to get rid of the center line, but it doesn't make a difference. Does anybody know what I might be doing wrong? I want to bore with a chamfer on each end. Can't get a chamfer command to work after selecting either line (front or back) in addition to the line offset from Z center.
-BillMactec54
Reply With Quote
Posting Permissions
