[ADNAN]

hello
i am using master cam and i have controller GSK 928 tea lathe i want to make program on master cam when i Generator G code and send the machine my machine not accept master cam G code file....

Master Cam Program..
N110 G0 T2020
N120 G18
N130 G97 S3600 M03
N140 G0 G54 X-18. Z5.
N150 G50 S3600
N160 G96 S550
N2980 G71 U.1 R.2
N2990 G71 P3000 Q3050 I0.1 K0.5 F.50
N3000 G0 X-2.2 S550
N3010 G1 Z-9.9
N3020 X-5.6
N3030 G2 X-6. Z-10.1 K-.2
N3040 G1 Z-11.1
N3050 X-16.
N3060 G0 Z5.
N3160 M30

At Controller (machine accept and work)
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
advise me post processor or if any one give me post processor

[MoemenAwad]

me too have the same problem

[cncmakers001]

hello
i am using master cam and i have controller GSK 928 tea lathe i want to make program on master cam when i Generator G code and send the machine my machine not accept master cam G code file....

Master Cam Program..
N110 G0 T2020
N120 G18
N130 G97 S3600 M03
N140 G0 G54 X-18. Z5.
N150 G50 S3600
N160 G96 S550
N2980 G71 U.1 R.2
N2990 G71 P3000 Q3050 I0.1 K0.5 F.50
N3000 G0 X-2.2 S550
N3010 G1 Z-9.9
N3020 X-5.6
N3030 G2 X-6. Z-10.1 K-.2
N3040 G1 Z-11.1
N3050 X-16.
N3060 G0 Z5.
N3160 M30

At Controller (machine accept and work)
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
advise me post processor or if any one give me post processor

Need to edit some head lines and bottom lines, because the format is not totally the same.

[Marshall96]

hello
i am using master cam and i have controller GSK 928 tea lathe i want to make program on master cam when i Generator G code and send the machine my machine not accept master cam G code file....

Master Cam Program..
N110 G0 T2020
N120 G18
N130 G97 S3600 M03
N140 G0 G54 X-18. Z5.
N150 G50 S3600
N160 G96 S550
N2980 G71 U.1 R.2
N2990 G71 P3000 Q3050 I0.1 K0.5 F.50
N3000 G0 X-2.2 S550
N3010 G1 Z-9.9
N3020 X-5.6
N3030 G2 X-6. Z-10.1 K-.2
N3040 G1 Z-11.1
N3050 X-16.
N3060 G0 Z5.
N3160 M30

At Controller (machine accept and work)
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
advise me post processor or if any one give me post processor

Help!! you can showme a program that i help me in program cnc gsk 928 TD