Well new machine build is not that accurate, since this is going to be an 'off the shelf' model. I do intend to be doing my own work on the homing, limits and so on.

I sold off my homemade Solsylva machine, looking for something smaller and more accurate. Currently I have an OMIO X6-2200L shipping from china. I have to say the customer service has been excellent, they also agreed to ship me the frame only since I already have some of the components, plus I was looking to build my own control box anyway.

So in the meantime, I have been putting this together, based on a used Schneider 40 x 30cm electrical box I found on eBay:

Attachment 412878

24V cooling fan with filter on RH side, exhaust on rear (box will be offset from wall)

Attachment 412880

2 x PSUs, also the Wantai stepper motor controllers

Attachment 412882

Finally I sourced these buttons from Hong Kong - the logos are printed on acetate using a normal b/w laser printer, then cut up and inserted into the button caps. Drop me a PM if you're interested in having a copy of the logos as a PDF file.

Attachment 412884

I might have some questions on the electronics coming up!