585,568 active members*
3,366 visitors online*
Register for free
Login

Thread: Multicam CNC Router 1000 series

Results 1 to 4 of 4
  1. 02-26-2019, 12:52 AM #1
    FSSchmidt
    FSSchmidt is offline Junior Member
    Join Date
    Feb 2019
    Posts
    1

    Multicam CNC Router 1000 series

    Hey, I'm having troubles getting the depth to set on my router. I don't know if it's a suction or mill problem. The depth won't set for any bits including our mill bit. Any help appreciated.
    Reply With Quote Reply With Quote
  2. 02-26-2019, 08:56 PM #2
    he1957
    he1957 is offline
    Join Date
    Jun 2018
    Posts
    362

    Re: Multicam CNC Router 1000 series

    What happens when you try? Describe the behaviour.

    Did it work before?

    What's changed between when it worked (assuming it did) and now?
    Reply With Quote Reply With Quote
  3. 02-28-2019, 01:00 AM #3
    MCPservice
    MCPservice is offline Registered
    Join Date
    Jun 2010
    Posts
    463

    Re: Multicam CNC Router 1000 series

    Explain what happens when you try to calibrate.

    Is it immediately going up when you hit your 0 key or does it keep going down, and acts like it doesn't see the block.
    Reply With Quote Reply With Quote
  4. 02-28-2019, 07:27 PM #4
    NSchlee
    NSchlee is offline Registered
    Join Date
    Sep 2006
    Posts
    118

    Re: Multicam CNC Router 1000 series

    I had a similar problem. Turned out the surface block wire had broken internally. Check it for continuity.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules