When I try to do a ATC cycle the arm will come down and swing to grab the tool, but the spindle is not releasing the tool. If I manually push the tool release button on the front of the spindle, I can change tools by handle just fine.
Results 1 to 2 of 2
-
02-26-2019, 08:28 PM #1
- Join Date
- Dec 2018
- Posts
- 4
OKK PCV-40, M86 Control, ATC Error
-
03-07-2019, 02:54 PM #2
- Join Date
- Dec 2018
- Posts
- 4
Re: OKK PCV-40, M86 Control, ATC Error
Found the problem, the atc motor was out of phase and running backward
Originally Posted by mstoecklin51
Reply With QuoteSimilar Threads
-
Arrow 500 with Control Techniques control 9343 error on boot up
By BSavulis in forum Cincinnati CNCReplies: 2Last Post: 03-10-2017, 08:21 PM -
T-2 control, Error code 533
By iperel in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 04-04-2014, 10:38 PM -
GE control error message
By Good_GuyMN in forum DNC Problems and SolutionsReplies: 0Last Post: 02-14-2009, 08:22 AM -
BOSS Control ERROR
By snovak240 in forum DNC Problems and SolutionsReplies: 2Last Post: 05-29-2008, 02:15 PM -
CNC control error
By le_hungvn in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 12-06-2006, 04:55 PM
Tags for this Thread
Posting Permissions
