Hello, please help! The problem is that the old machine MAZAK SQT 15MS-Y(Mazatrol T plus system) erased the parameters on the SRAM board. CNC system - Mitsubishi FCA535LHY. I have restored parameters manually from the list on paper. The machine turned on goes to the zero position on all axes, there are no errors. But when the turret rotates, the tool number does not change. He is always constantly T0. In MDI mode, the turret does not rotate on a tool call command. How can I write to the memory of the machine T1 in the first position of the turret? Please help in this problem.
Results 1 to 2 of 2
-
02-28-2019, 10:57 AM #1
- Join Date
- Jan 2019
- Posts
- 1
Tool parameters restore problem (MAZAK 15MS-Y)
-
05-05-2019, 03:59 PM #2
Registered
- Join Date
- Sep 2017
- Posts
- 139
Re: Tool parameters restore problem (MAZAK 15MS-Y)
You would have to delete the complete tool data and insert once again manually. This can happen if the tool dat is corrupted
Reply With QuoteSimilar Threads
-
MAZAK FH6800's Parameters for Tool Lenght measurement system
By sonu in forum Mazak, Mitsubishi, MazatrolReplies: 5Last Post: 09-28-2022, 11:11 AM -
Postprocessor Mazak sqt 15ms
By Tutan in forum FeatureCAM CAD/CAMReplies: 3Last Post: 01-30-2013, 02:02 AM -
Mazak sqt 15MS postprocessor
By Tutan in forum Post Processor FilesReplies: 0Last Post: 01-26-2013, 10:12 AM -
Restore Problem
By sodfarmer in forum AutodeskReplies: 2Last Post: 04-19-2012, 12:19 AM -
restore parameters
By crousow in forum FanucReplies: 1Last Post: 03-08-2009, 10:44 PM
Tags for this Thread
Posting Permissions
