Hello,
first sorry for my englishI demonstrate the differences between a very old (I think 1965) Emco Maximat Standard and a early Bernardo WQV550 China turning machine.
The Bernardo is my first DIY CNC machine and the Emco was a very good purchase. The Emco has perfect requirements for linear guides!!!
https://youtu.be/E7Bh_UrgacQ
After cleaning the Emco i switch the old ball bearing and paint the machine. Next step is ball screw on X and Z...
Results 1 to 3 of 3
-
03-02-2019, 10:00 AM #1
Member
- Join Date
- Mar 2019
- Posts
- 3
Old Emco against new China turning machine
-
03-02-2019, 10:03 AM #2
Member
- Join Date
- Mar 2019
- Posts
- 3
The Video is in unfortunately in german but i think the pictures from the drive spindle and the machine parts are also interesting...
-
03-02-2019, 07:09 PM #3
Member
- Join Date
- Mar 2019
- Posts
- 3
And here is part 2 of the Video.
https://youtu.be/qTHRVyBaKto
Reply With Quote
Posting Permissions
